1
1
Check
11
EP-MS41_ASIA.indb
11
6
Switch on the power supply.
1 Insert the power plug into an electrical
2
2
2 Turn the lock switch key to the "open"
3
3
3 Slide the power switch to the "on" position.
Check once a month.
See Warning No. 8 on page 1.
Check that the fabric of the unit where the massage heads
move has not been ripped.
•
Remove the unit cover.
How to remove the unit cover (See pages 25 and 26.)
7
Sit with the back of your head aligned
with the upper part of the backrest.
Only when using the leg/foot massage
8
Take out the leg/foot massage section
and put your feet on it.
1 Pull straight up on the leg/foot massage
2 Put your feet on the sole section.
3 Push your feet forward until it locks with a
2
outlet.
position.
lock release band.
•
The leg/foot massage section will extend forwards a
small amount.
"click".
(Angle of the sole section or the calf section will not
be fixed.)
3
•
It will turn into a legrest if you
remove your feet from the sole
section.
Click
2014-10-21
13:21:10