Sony PCG-XG28 Primary User Manual page 39

Fn+ (ESC)
System Suspend
Fn+ (F3)
Mute On/Off
Fn+ (F4)
Speaker volume
Fn+ (F5)
Brightness control
Fn+ / (F7)
Switch to the
external display/LCD
Fn+ / (F8)
Fn+ (F12)
System Hibernation
Puts the system into System Suspend mode, a
power management state. To return the system to
the active state, press any key or press the power
switch on your computer.
Toggles the built-in speaker off and on.
Adjusts the built-in speaker volume.
To increase volume, press Fn+F4, then
To decrease volume, press Fn+F4, then
Adjusts the brightness of the LCD.
To increase light intensity, press Fn+F5 and then
or .
To decrease light intensity, press Fn+F5 and then
or .
Toggles through the LCD, external display
(connected to the
LCD and external display.
Toggles through the external display connected to
an optional Mini Docking Station (PCGA-PSX1) and
the LCD.
Provides for the lowest level of power consumption.
When you execute this command, the state of the
system and state of the peripheral devices are
written to the hard disk and the system power is
turned off. To return the system to the originals
state, use the power button to turn on power.
Monitor connector) and both
or .
or .