3
In the Hardware devices box, select Y-E Data USB Floppy, and click Stop.
The Stop a Hardware device window appears.
4
Make sure Y-E Data USB Floppy is selected, and click OK. A message
appears stating it is safe to remove the hardware.
5
Unplug the floppy disk drive from the computer, port replicator, or docking
station.
To carry an floppy disk drive
Fold the floppy disk drive cable and connector into the side compartment on
❑
the floppy disk drive.
Carrying an Floppy Disk Drive
Notes on handling floppy disks
Do not open the shutter manually and touch the surface of the floppy disk.
❑
Keep floppy disks away from magnets.
❑
❑
Keep floppy disks away from direct sunlight and other heat sources.
Connecting a Floppy Disk Drive
51