Connecting To A Local Area Network - Sony PCG-VX88 VAIO User Guide (primary manual) User Manual

Connecting to a Local Area Network

You can connect your computer to 10BASE-T and 100BASE-TX-type Local
Area Networks (LANs) by using the computer's Ethernet port. For the detailed
settings and devices needed to connect to the network, ask your network
administrator.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the
port. Do not connect any other type of network cable or a telephone cable.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
If you enable Wake on LAN, the power saving mode will be switched to
Standby mode.
Connecting to a Local Area Network
Ethernet
port
Ethernet
35