Dell S2418HN User Manual page 13

Power Management Modes
If you have VESA's DPM-compliant video card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as power save mode*. If the computer detects input from the keyboard,
mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
ON
E
TEC
The OSD operates only in the normal operation mode. If you press any button in the
active-off mode, one of the following message is displayed:
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance.
***Power consumption of on mode as defined in Energy Star 7.0 version.
****Total energy consumption in kWh as defined in Energy Star 7.0 version.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals you
ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR -compliant.
Vertical Video Power Indicator
Sync
Active Active White
Inactive Off White
(blinking slowly)
- - Off
Power Consumption
14.32 W***
45.1 kWh****
Power Consumption
28 W (maximum)**
20 W (typical)
Less than 0.5 W
Less than 0.3 W
About Your Monitor
| 13