General Considerations; Important Safety Instructions - Barco ImagePRO–4K Safety Manual

1.1 General considerations

General safety instructions
• Before operating this equipment please read the ImagePRO–4K User Guide thoroughly and retain it for
future reference.
• All warnings in this documentation manual should be adhered to.
• All instructions for operating and use of this equipment must be followed precisely.
• All local installation codes should be adhered to.
Battery caution
CAUTION: Risk of explosion when the battery is replaced by an incorrect type. Dispose of used batteries
according to the waste instructions.
ATTENTION : Risque d'explosion en cas d'usage d'une batterie non prévue pour cet appareil. Jetez les
batteries usagées suivant les règles de recyclage prévues.
WARNING: Ensure you understand and follow all safety guidelines, safety instructions, warnings
and cautions mentioned in the product documentation.
WARNING: The mains power plug connected to the wall outlet must be easily accessible at all
times for all installation modes.
Environment
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious
damage to it.

1.2 Important safety instructions

To prevent risk, personal injury, and ImagePRO–4K video processor damage
Please read this chapter carefully. It contains important information to prevent personal injury while installing
the ImagePRO– 4K video processor. Furthermore, it includes several cautions to prevent damage to the
device. Ensure that you understand and follow all safety guidelines, safety instructions and warnings
mentioned in this chapter before installing the ImagePRO– 4K video processor. After this chapter, additional
"warnings" and "cautions" are given depending on the installation procedure. Read and follow these
"warnings" and "cautions" as well.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Only trained technicians may install an ImagePRO–4K video processor.
• Installation of the ImagePRO–4K video processor must be done in a dust free area.
• Only use attachments/accessories specified by the manufacturer.
• CAUTION: Troubleshooting must be performed by a trained technician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
• Refer all servicing to qualified service personnel. Servicing is required when the system has been
damaged in any way, such as liquid has been spilled or objects have fallen into the system, or the system
has been exposed to rain or moisture, does not operate normally, or has been dropped.
• FRAGILE: The ImagePRO–4K video processor is fragile. Handle the unit with care at all times.
• Do not remove the top cover during normal operation. Removal of the top cover exposes dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover
installed.
Safety guidelines
R5906169-00 ImagePRO–4K 5