Table of Contents
Advertisement
5
Instructions of use
Switching on
It is firstly ascertained that all connections are made and that the entire installation
complies with the current standards in force.
As soon as the WB interface is powered up, it is ready for use and the GREEN light-emitting diode
is lit (Figure 1, Ref. 4)
Switching off
The device is switched off essentially by shutting down the power supply at an electrical cabinet.
The green LED goes out.
Settings
The handling and setting operations described in this section are intended strictly
for authorised persons only as they are liable to affect the safety of the detection
function.
NPMWBEN
Revision A.0
Figure 4
WB Interface
WB/4-20mA CONVERTER
USER MANUAL
9
Advertisement
Table of Contents
