Troubleshooting The Docking Station; I Cannot Operate The Optical Drive In The Docking Station, When The Docking Station Is Connected To The Notebook; I Cannot Operate The Optical Drive In The Docking Station, When The Docking Station Is Connected To The Notebook And The Notebook Is Connected To Another Computer Via An I.link Connection - Sony PCG-R505DFK VAIO User Manual

VAIO® R505 SuperSlim Pro™ Notebook Quick Start

Troubleshooting the Docking Station

I cannot operate the optical drive in the docking station, when
the docking station is connected to the notebook.
Follow these steps to set the i.LINK®
1 Disconnect your notebook from the docking station.
2 Disconnect the AC adapter and all cables from your docking station.
3 Set the i.LINK® network switch on the bottom of the docking station to the
unmarked side with a thin pen tip.
4 Connect the docking station to the notebook.
5 Turn on your notebook.
✍
Do not set the i.LINK network switch when the notebook is on. This causes the
notebook to malfunction.
Set the i.LINK network switch after removing all cables connected to the docking
station.
I cannot operate the optical drive in the docking station, when
the docking station is connected to the notebook and the
notebook is connected to another computer via an i.LINK
connection.
Set the i.LINK® network switch at the bottom of the docking station to the
marked side. See "If your notebook is connected to the docking station" for
more information.
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
196
*
network switch.