Table of Contents
Advertisement
Getting started
Installation
You must install and charge
the battery before using the
cordless handset.
Install the telephone base close to a telephone wall jack and an electrical
outlet not controlled by a wall switch. The telephone base can be placed on
a flat surface or vertically mounted on the wall (pages 10-11). For optimum
range and better reception, place the telephone base in a central and
open location.
If you subscribe to high-speed Internet service (DSL- digital subscriber
line) through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack (page 6). The filter prevents
noise and caller ID problems caused by DSL interference. Please contact your
DSL service provider for more information about DSL filters.
Your product may be shipped with a protective sticker covering the handset
or telephone base display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com
1 (866) 288-4268
Avoid placing the telephone base and charger too close to:
•
Communication devices such as television sets, VCRs, or other
cordless telephones.
•
Excessive heat sources.
•
Noise sources such as a window with traffic outside, motors, microwave
ovens, refrigerators, or fluorescent lighting.
•
Excessive dust sources such as a workshop or garage.
•
Excessive moisture.
•
Extremely low temperature.
•
Mechanical vibration or shock such as on top of the washing machine or
work bench.
or call
.
See pages 7-9 for
easy instructions.
1 (800) 222-3111
1
. In Canada, dial
Advertisement
Table of Contents
