Menus - Volvo Penta D7A T Operator's Manual

Control System
26
A
1
2
3

Menus

There are 4 display menus available:
Main
Measurement
Adjustment
History
Main
Press PAGE button to toggle the menu screens. Se-
lect MAIN page (A1). Use UP/DOWN buttons to togg-
le the different screens.
Alarm list
ECU (Engine Control Unit) alarm list and Alarm list are
the last two screens in the MAIN page (A1).
Select MAIN page (A1). Press UP button (twice for
ECU list).
NOTE! ECU Alarmlist will always be empty since this
is only valid for electronic engines.
This will list all active alarms (number of alarms indi-
cated in the upper right corner). Highlighted alarms are
still active. The other alarms are not active but not yet
acknowledged.
NOTE! In case of multiple alarms, scroll alarmlist
using ENTER button.
ACKNOWLEDGE button acknowledges all alarms.
Non-active alarms disappears from the list.
Alarm list appears on the screen when a new alarm is
set and MAIN page (A1) is active.
NOTE! Alarm list is not activated when you are vie-
wing values, parameters or history.
Three state Alarm list indication
1. Active not acknowledged alarm
2. Active acknowledged alarm
3. Inactive not acknowledged alarm
A. Number of alarms
Statistics
Select MAIN page (A1). Press UP button three (3) ti-
mes.
1. Running hours
2. Successful starts
3. Unsuccessful starts
4. Service time (hours to service)