Battery Installation; How To Reset The System - Alpine PMD-B100 - Blackbird Owner's Manual

261985 PMD-B100_r15.qxd

Battery Installation

How to Reset Blackbird
In the event the system requires a reset, pull over in a safe and legal manner before
doing so. Insert a paper clip or similar object into the reset hole (located under the
GPS antenna in the upper left hand corner of the recessed area) and depress the
reset button for at least 1 second. Then, to restart the system, press and hold the
power button for 2 seconds. The system will re-start.
9/13/06 3:15 PM Page 7
WARNING
Always turn off power to the system before
installing or removing the battery. Failure to do
so will result in damage to your system.
1
Place Blackbird face down on a flat surface.
2
Press the battery door and pull away from the
main unit body.
3
Attach the battery to the battery door until a
click sound-heard.
4
Insert and slide the battery assembly back into
the main unit until a click sound is heard.
Note:
It is recommended that the battery be
charged using the supplied AC adapter for 8 hours
before using the system. Avoid removing this
rechargeable battery. If the battery needs to be
replaced, dispose of it in accordance with local haz-
ardous materials requirements.
7