Installation; How To Mount Blackbird; To Remove The Navigation System From The Cradle - Alpine PMD-B100 - Blackbird Owner's Manual

261985 PMD-B100_r15.qxd

INSTALLATION

How to Mount Blackbird

3
4
5

To Remove the Navigation System from the Cradle

6
9/13/06 3:15 PM Page 6
WARNING
Improper installation may make the navigation sys-
tem fall out from the cradle while driving. Please
make sure all locks and knobs are turned tight.
Do not install the navigation while driving.
1
Find a spot suitable for the navigation system.
Ensure that both the suction cup and windshield
area are clean and free of dirt and grease before
attaching it.
Stick the suction cup mount against the windshield.
Turn the knob to activate the vacuum to lock the
position.
2
Turn the knob counterclockwise to adjust up/down
position. Then turn clockwise to set the position.
3
Turn the knob clockwise to adjust right/left position.
Then turn counter clockwise to set the position.
DEVICE SHOULD NOT BE INSTALLED SO THAT IT
2
OBSTRUCTS THE DRIVER'S VIEW.
4
Open the antenna before inserting the navigation
system into the cradle. For best reception sensitivity,
position the antenna 90 degrees to the main unit.
5
Slide the navigation system into the cradle until you
hear a click sound.
6
Plug the cigarette lighter charger into the cigarette
lighter socket.
CAUTION
Remove the navigation system when you are away
from the vehicle to prevent theft.
1
Press and hold the eject button on the cradle.
2 Grasp the navigation system behind the antenna
and remove by sliding up and out of the cradle.
Note to California consumers:
Code 26708 prohibits the placement of any object
on windows. Refer to your authorized Alpine dealer
for other installation options.
California Vehicle