Chassis Intrusion Header: Jcase1; 33V Gpio Box Header: Jgpio1; 5V Gpio Box Header: Jgpio2 - MSI MS-9892 Manual

Chassis Intrusion Header: JCASE1

This connector connects to the chassis intrusion switch cable. If the computer
case is opened, the chassis intrusion mechanism will be activated. The system
will record this intrusion and a warning message will flash on screen. To clear the
warning, you must enter the BIOS utility and clear the record.

33V GPIO Box Header: JGPIO1

5V GPIO Box Header: JGPIO2

This connector is provided for the General-Purpose Input/Output (GPIO)
peripheral module.
JGPIO1: 8 bits (4 x GPI; 4 x GPO), 3.3V
JGPIO2: 8 bits (4 x GPI; 4 x GPO), 5V
JGPIO1
JGPIO2
MS-9892
2-7