Hardware Setup
Chassis Intrusion Header: JCASE1
This connector connects to the chassis intrusion switch cable. If the computer case
is opened, the chassis intrusion mechanism will be activated. The system will record
this intrusion and a warning message will flash on screen. To clear the warning, you
must enter the BIOS utility and clear the record.
USB2.0 Box Header: JUSB1
USB2.0 Port: JUSB2
This connector is ideal for connecting USB devices such as keyboard, mouse, or
other USB-compatible devices.
Important
• Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
• Avoid holding the motherboard by JUSB2 to prevent the component from falling off.
Front Panel Box Header: JFP1
This front panel connector is provided for electrical connection to the front panel
switches & LEDs and is compliant with Intel Front Panel I/O Connectivity Design
Guide.
PW LED (+)
PW LED (-)
2
1
HDD LED (+)
HDD LED (-)
2-14
PW SW (+)
PW SW (-)
4
6
8
3
5
7
Reser SW (-)
Reset SW(+)
Key
LED(+)
Voltage(V)
10
Power
5
9
HDD
5
NC
Current(mA)
18.51
18.51