Table of Contents
Advertisement
Software
Operating Environment
Temperature
Humidity
EMI
FCC Class B, CE Class B
A.2 GPIO Terminal Application
Typically used in association with programming scripts for developing applications for motion detection, event
triggering, alarm notification via e-mail, and a variety of external control functions. The GPIO connectors are
located on the rear panel of the camera, which provide the interface of connecting the sensor device (IN) and
controlled device (OUT).
Connector Pin Assignment
PIN
SPECIFICATION
Active High voltage 9~40V DC;
IN
Dropout-out voltage 0V DC
Close circuit current 70mA AC or 100mA DC maximum, Output
OUT
resistance 30 Ohm;
Open circuit voltage 240V AC or 350V DC maximum
Interface Schematic
"SkyIPCam View" for playback/recording/
configuration features
- Operation: 0°C ~ 45°C
- Storage: -15°C ~ 60°C
- Operation: 20% ~ 85% non-condensing
- Storage: 0% ~ 90% non-condensing
- 51 -
Advertisement
Table of Contents
