Table of Contents
Advertisement
Select
Refresh
Name*
Model
IP*
Username*
Web Port*
Password
Video Format
Reset
OK
Cancel
* It's recommended to use 'Select' button to fill the content of this field.
After you've set all channels you wish to set, click 'OK' to save settings, and if
everything's correct, you'll see the camera's image in ConnectSky™ Viewer's main
menu:
'Camera Search' box.
Select a camera listed in 'Camera Search' box, and click
'Select' button to fill all parameters of selected camera in every
camera configuration fields.
Rescan all cameras on your local network. If you didn't see the
camera you expected in 'Camera Search' box, or new cameras
has been joined to your local network after last scan.
Input the name of camera here. Default value is the first 6 bytes
of camera's MAC address, you can change the name of
camera so you can remember the camera's location of purpose
easily.
Displays the model of selected camera, this field can not be
changed.
Input the IP address of camera.
Input the user name of camera.
Input the web port of the camera. By default it's '80'.
Input the password of camera. Default value is '1234'. You
should change the password if you changed the password of
selected camera.
Select the video encoding format of this camera (MJPEG or
MPEG4).
Clear all fields in 'Camera Configuration' section.
Save settings in this tab.
Discard all settings in this tab.
Advertisement
Table of Contents
