Table of Contents
Advertisement
SMTP Server
SMTP Port
Sender E-Mail
Address
SMTP
Authentication
User Name
Password
Click 'Apply' to save settings and make the new settings take effect.
After that, you can click 'Send a test email' to send a testing Email to the address you
set here, so you can make sure the setting you specified here is correct and working.
2.5.2 FTP Settings
These settings are used to send the captured picture by FTP:
Input the IP address or host name of the SMTP server (the
server that delivers the Email for you) here.
If you don't know, please refer to the SMTP server you're using
in your Email software (i.e. Microsoft Outlook), or ask your
network administrator or ISP.
Input mail server's SMTP port here. Most of mail servers use
port number 25.
Input the Email address of mail sender, this will help you to
identify the Email sent by this IP camera by sender's Email
address.
NOTE: Some mail server would reject to deliver the Email from
unknown sender, it's recommended to input your own Email
address here, or any other actual one.
Some SMTP server requires mail senders to be authenticated
before they can send Email. If your SMTP server requires you
to do so, please select 'Enable', or select 'Disable' to disable it.
If you don't know, please refer to the SMTP server you're using
in your Email software (i.e. Microsoft Outlook), or ask your
network administrator or ISP.
Please input the user name of SMTP server here, if your SMTP
server requires the use of authentication.
Please input the password of SMTP server here, if your SMTP
server requires the use of authentication.
Advertisement
Table of Contents
