Motion detection region settings can be found at the bottom of this page:
The descriptions of every setting in motion detection menu will be given below:
Item
Region1 /
Region2 /
Region3
Sensitivity
Refresh
Save
Description
Check the box to enable / disable a certain motion detection
area.
Control the detection sensitivity of motion detection of
respective motion detection region. When sensitivity is higher,
small changes in image will cause IP camera to send a Email /
FTP notification; if you received too much unwanted
notification, try to set sensitivity to a lower value.
Click this button to take and display a new picture so you can
make real-time adjustments to motion detection region.
Save current motion detection settings.