Airlink101 AIC1620W Quick Installation Manual page 13

Wireless n mpeg4 3gpp network camera

Hide thumbs Also See for AIC1620W:

Table of Contents

Step 4.9

Confirm your settings at this page. If everything is correct, click

Apply to save the settings, then the camera will restart in 50 seconds.

Step 4.10

After the camera is restarted, unplug the network cable from it. It

will take around 1 or 2 minutes for the camera connecting to your wireless

router/AP.

To make sure the wireless connection is successfully established, open the

SkyIPCam Utility and click on Search. If the camera shows up in the list, it

is connected to your wireless network successfully. If not, please verify the

SSID and the wireless security settings you configured at Step 4.8 are

correct.

Table of Contents

Skyipcam1620w