Advertisement
Step 10
Verify the settings you have configured and click Restart.
Step 11
Click Finish to end the EZ Setup Wizard.
If you are using Bridge mode, you need to follow the same configuration
procedure on other Access Point(s).
Congratulations! You have finished the configuration for your
Airlink101 Access Point.
Section 2
Technical Support
E-mail:
support@airlink101.com
Toll Free: 1-888-746-3238
Website:
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, mix of wireless products used, radio frequency interference (e.g.,
cordless telephones and microwaves) as well as network overhead lower actual data throughput rate.
Compatibility with 802.11n devices from other manufacturers is not guaranteed. Specifications are subject to
change without notice. Photo of product may not reflect actual content. All products and trademarks are the
property of their respective owners. Copyright© 2010 Airlink101®
www.airlink101.com
Advertisement
