Adobe 38040334 - Dreamweaver CS3 User Manual page 495

In the Blind Up From/Blind Down From box, define the blind-scrolling starting point as a percentage or as a pixel
6
number. These values are calculated from the top of the object.
In the Blind Up To/Blind Down To field, define the blind-scrolling end point as a percentage or as a pixel number.
7
These values are calculated from the top of the object.
8 Select Toggle Effect if you want the effect to be reversible, scrolling up and down with successive clicks.
Apply a Grow/Shrink effect
Note: You can use this effect with these HTML objects: address, dd, div, dl, dt, form, p, ol, ul, applet, center, dir, menu,
or pre.
(Optional) Select the content or layout object you want to apply the effect to.
1
2 In the Behaviors panel (Window > Behaviors), click the Plus (+) button and select Effects > Grow/Shrink from
the popup menu.
3 Select the object's ID from the target element pop-up menu. If you have already selected an object, choose
<Current Selection>.
In the Effect Duration field, define the time it takes for the effect to occur, in milliseconds.
4
5 Select the effect you want to apply: Grow or Shrink.
In the Grow/Shrink From box, define the object's size when the effect starts. This is a percentage of the size or a
6
pixel value.
In the Grow/Shrink To box, define the object's size when the effect ends. This is a percentage of the size or a pixel
7
value.
8 If you choose pixels for either the Grow/Shrink From or To boxes, the wide/high field becomes visible. Depending
on the option you choose, the element will grow or shrink proportionately.
Select whether you want the element to grow or shrink to the upper-left corner of the page or into the page's center.
9
10 Select Toggle Effect if you want the effect to be reversible, growing and shrinking with successive clicks.
Apply a Highlight effect
Note: You can use this effect with any HTML objects except applet, body, frame, frameset, or noframes.
(Optional) Select the content or layout object you want to apply the effect to.
1
2 In the Behaviors panel (Window > Behaviors), click the Plus (+) button and select Effects > Highlight from the menu.
Select the object's ID from the target element menu. If you already selected an object, choose <Current Selection>.
3
4 In the Effect Duration box, define how long you want the effect to last, in milliseconds.
Select the color you want the highlight to start with.
5
6 Select the color you want the highlight to end with. This color lasts only as long as the duration you define in Effect
Duration.
Select the color for the object after the highlight has finished.
7
8 Select Toggle Effect if you want the effect to be reversible, cycling through the highlight colors with successive
clicks.
September 4, 2007
DREAMWEAVER CS3 488
User Guide