Adobe 38040334 - Dreamweaver CS3 User Manual page 407

There are two repeating region template objects you can use: repeating region and repeating table.
See also
"Types of template regions" on page 387
Create a repeating region in a template
Repeating regions enable template users to duplicate a specified region in a template as often as desired. A repeating
region is not necessarily an editable region.
To make content in a repeating region editable (for example, to allow a user to enter text in a table cell in a template-
based document), you must insert an editable region in the repeating region.
In the Document window, do one of the following:
1
•
Select the text or content you want to set as a repeating region.
• Place the insertion point in the document where you want to insert the repeating region.
2 Do one of the following:
•
Select Insert > Template Objects > Repeating Region.
•
Right-click (Windows) or Control-click (Macintosh), then select Templates > New Repeating Region.
•
In the Common category of the Insert bar, click the Templates button, then select Repeating Region from the pop-
up menu.
3 In the Name box, enter a unique name for the template region. (You cannot use the same name for more than one
repeating region in a template.)
Note: When you name a region, do not use special characters.
Click OK.
4
See also
"Insert an editable region" on page 398
Insert a repeating table
You can use a repeating table to create an editable region (in table format) with repeating rows. You can define table
attributes and set which table cells are editable.
1 In the Document window, place the insertion point in the document where you want to insert the repeating table.
Do one of the following:
2
•
Select Insert > Template Objects > Repeating Table.
• In the Common category of the Insert bar, click the Templates button, and then select Repeating Table from the
pop-up menu.
Specify the following options and click OK.
3
determines the number of rows the table has.
Rows
Determines the number of columns the table has.
Columns
Determines the number of pixels between a cell's content and the cell boundaries.
Cell Padding
September 4, 2007
DREAMWEAVER CS3 400
User Guide