Viva 7LIECH-SC-SSF User Manual page 12

6. Once unit has completed draining replace drain cap and drain plug.
7. Remove remaining water from cold reservoir by dispensing from both taps into a pitcher.
8. Remove bottle receptacle or collar by turning it counter clockwise and pulling up. Store in a safe
place.
9. Remove plastic baffle from inside reservoir.
10. Clean bottle receptacle and baffle with a soft cloth using a mixture of one gallon tap water and 1
tablespoons unscented household bleach, then rinse.
11. Wipe inside of reservoir and area around both taps with a soft cloth using the mixture of one
gallon tap water and 1 tablespoon unscented household bleach(i.e. 5.25% sodium bypochlorite).
12. Pour the one gallon tap water and 1 tablespoon unscented household bleach mixture into the
reservoir.
13. Dispense 1 cup of mixture through both faucets to clean out water ways.
14. Place a 2 gallon or larger bucket under the drain plug in the rear of the dispenser. Remove drain
cap and silicon plug to drain.
Reminder - Place drain cap and drain plug in a safe
location so they are not lost.
15. Remove the cleaning mixture from reservoir by dispensing
it from both taps into a pitcher.
16. Replace drain cap and drain plug.
17. Rinse system by repeating steps 12 – 15 above, but this
time using 1 gallon of tap water.
18. Remove remaining water from reservoir by dispensing
from both taps into a pitcher.
19. Replace all parts including silicon plug, drain cap, baffle
and probe assembly.
Excessive Weight Hazard
Use two or more people to move and install the
water cooler and the bottles.
Failure to do so can result in back or other injury.
20. Install a fresh bottle of water after cleaning
bottle cap and neck area.
21. Repeat rinsing cycle if chlorine taste persist.
22. Plug power cord into grounded wall outlet.
23. Turn energy saving switch ON.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-469-8482 for assistance
WARNING
Model # 7LIECH-SC-SSF:Page 12
WARNING
Electrical shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.