Default Settings Of The Bushnell Trophy Cam - Bushnell TROPHY CAM 119415 Instruction Manual

Table 1: Default settings of the BUSHNELL TROPHY CAM
Parameter name
Camera Mode
Image Size
Video Size
Capture Number
Video Length
Interval
Sense Level
Time Stamp
Timer Switch
In the ON (Live) mode the BUSHNELL TROPHY CAM is ready for motion
detection. After having entered the ON mode, the BUSHNELL TROPHY
CAM will take pictures or videos automatically according to previous
settings when it is triggered by detection of activity. The pictures or
videos are saved on the SD-card. Every picture or video has its own file
name.
Before entering into the ON mode please pay attention to the following:
(1) The polarities of the power are correct and the power is
sufficient.
(2) The SD-card has sufficient space and its write-protection is
disabled.
(3) Power switch at ON position.
(4) Avoiding temperature and motion disturbances in front of the
device such as aiming at a heat source or obstructions from tree
branches or brush.
(5) The height away from ground for placing the device should vary
with the object size appropriately. In general, 3 to 6 feet is preferred.
Default
Camera
3M Pixel
640×480
1 Photo
Avi 10 Second
1 Minute
Normal
On
Off
Other settings
Video
5M Pixel
320x240
2 Photo, 3 Photo
1-60 seconds
0-59 seconds, 1-60 minutes
High, Low
Off
On (00:00 – 23:59)
9