Setting Time Stamp - Bushnell TROPHY CAM 119415 Instruction Manual

4.1.10 Setting Time Stamp

This parameter defines whether the time should be stamped in the
pictures and video clips or not. The following shows you how to set time
stamp as "Off" provided that the previous value is "On" in MENU state:
a) Push the UP or DOWN key until the parameter "Time Stamp"
appears as shown in the Fig. 14(a) and 14(1).
b) Push the RIGHT or LEFT key, the value of the parameter will be
changed to "Off" as shown in the Fig. 14(b) and 14(2). The value
"Off" is highlighted.
c) Press OK key for saving setting or MENU key for canceling
operation and exiting. After pressing OK key the selected value
will be no more highlighted, shown in the Fig. 14(c) and 14(3)
Figure 14: Setting Time Stamp
(a)
(b)
(c)
(1)
(2)
(3)
.
23