Table of Contents
Advertisement
Mainboard removal and installation
To remove the mainboard, follow these steps:
1.
Power down the server node module. See "Switch and LED indicators" on page 16.
2.
Press the tabs (1) on both sides and use the handles (2) to pull out and remove the node module.
3.
Remove the air duct.
4.
Remove any installed PCI Express cards. See "PCI Express card removal and installation" on page 38.
5.
Remove the riser card. See "Replacing the riser card" on page 39.
6.
Remove the heatsink. See "Heatsink removal and installation" on page 43.
7.
Remove the CPU. See "CPU removal and installation" on page 45.
8.
Remove all memory modules. See "Memory removal and installation" on page 47.
54
Chapter 7
Advertisement
Table of Contents
