Advertisement
Fig. 39: Seat Latch Cover
Courtesy of GENERAL MOTORS CORP.
11. Install the latch cover (1) to the seat.
Tighten: Tighten the screw to 2 N.m (18 lb in).
12. In order to secure the seat back, manually rotate the center latch. Rotate the latch until the seat back clicks
into position.
13. Install the seat to the vehicle. Refer to Seat Replacement - Rear No. 2 in Seats.
DESCRIPTION AND OPERATION
SEAT BELT SYSTEM DESCRIPTION AND OPERATION
CAUTION: To help avoid personal injury from unrepaired crash damage to a restraint
system, perform the seat belt check for each seat belt system. Replace the
seat belt system if there is any doubt about the condition of system
components.
Advertisement
