Advertisement
7. Install the floor anchor bolt.
Tighten: Tighten the bolt to 55 N.m (41 lb ft).
8. Install the seat belt anchor bolt cover.
9. Install the door sill plate. Refer to Door Sill Plate Replacement - Front or Door Sill Plate Replacement
- Rear in Interior Trim.
SEAT BELT RETRACTOR REPLACEMENT - CENTER REAR
CAUTION: To avoid personal injury to the occupants of the vehicle, observe the
following precautions:
Removal Procedure
More than one supplier's seat belts are used, therefore, install ONLY
the seat belt components specified in the GM parts catalog.
To verify that the correct seat belt components were installed, insert
the seat belt latch in the seat belt buckle. The latch must be fully
seated and be retained in the buckle until purposely released.
Advertisement
