Megaraid 9260-8I Sas Raid Creation - Acer AR585 F1 User Manual

MegaRAID 9260-8I SAS RAID Creation

Configuring MegaRAID SAS 260-8I
This section briefly shows how to create RAID volume with MegaRAID
SAS 260-8I.
Entering RAID BIOS Utility
To enter the RAID BIOS Utility for MegaRAID SAS 260-8I, press <Ctrl> +
<H> when you see the RAID BIOS prompt during POST. After POST
finished, the Adapter Selection page will show on the screen. Click
Start to launch the Configuration menu.
Loading factory default setting
1 Select Adapter Properties from the Configuration menu.
The current adapter settings appear. Click Next to change the
setting.
2 Change the setting of Set Factory Defaults from No to Yes then
click Submit.
3 Press <Ctrl> + <Alt>+ <Del> to reboot the server.
Creating RAID Volume
1 Click Start to launch the Configuration menu.
2 Select Configuration Wizard.
3 Select Add Configuration (default) and click Next.
4 Select Custom Configuration (default) and click Next.
5 Hold the <Ctrl> key and select the drives that you want to add into
the array. After selecting the drives, click Add to Array.
6 Click Accept DG then Next.
7 Select the array you just created, click on Add to SPAN then Next.
8 Select the RAID level you want to use, create the logical volume by
specify the size at Select Size, then click Accept to create the
logical volume.
9 Click Next after creating the logical volume.
10 Click Accept then Yes to save the configuration.
19