ActionTec T3270S User Manual page 8

T3270S Bonded VDSL Wireless AC Gateway Router
Rear Panel
The rear panel of the Router features 8 ports, and a Reset button.
Power Port
The Power port is used to connect the Power cord (Model No.
CDS024T-W120U by Adapter Tech) to the Router.
Reset Button
Depressing the Reset button for 10 seconds will restore the
Router's factory default settings. The reset process will start after
releasing the button.
WARNING! Do not unplug the Power cord from the Router
during the reset process. Doing so may result in permanent
damage to the Router.
WAN Ethernet Port
The WAN Ethernet port is used to connect the Router to a WAN
connection via an Ethernet cable.
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the Router
via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-
sensing ports, and either a straight-through or crossover Ethernet cable
can be used when connecting to the ports.
7