Intel i915G User Manual page 83

Appendix
If your RAID Mode selection is Mirror or Stripe + Mirror and you choose not to
delete the boot sector of the array, the following window will appear to ask
whether you want to rebuild an array. If you choose "Y", the Rebuild RAID
Menu will appear.
If you choose not to rebuild this array for the time being, the IT8212F RAID
controller cannot read data correctly because the data is inconsistent in the
mirrored hard drives. Thus, the following window will appear.
Highlight your selection and press the "Enter" key to select the source disk(s)
then the setting will be finished and the screen will go back to the Define RAID
Sub-Menu automatically. This array's setup is completed. You can press the
"Esc" key to go back to the Define RAID Menu .
C-7