Intel i915G User Manual page 64

RAID Configuration
Method 2
1. Locate another computer and insert the bundled CD into its CD-ROM drive.
2. A main menu screen will appear (Autorun feature)
3. Select the page "RAID floppy" as shown below
4. Insert a blank floppy into the A:drive
5. Click on the required driver to begin copy into the floppy
Step 3: Install O/S into RAID disk
Continue to install Windows XP/2000/NT4.0 as normal. When requested by
Windows Setup for RAID driver, insert the floppy created earlier in Step 2.
Step 4: Install Software utility for Windows
After the O/S has been installed, you may install the RAID controller's driver and
software. The RAID software is a Windows-based utility with graphical user
interface that provides an easy operating tool to configure and manage RAID
arrays.
1)Insert the bundled CD into the CD-ROM drive.
2)When the main menu appears, click on the RAID driver corresponding to the
controller you have configured in Step 1. See driver installation in section 6 for
more details.
Note: For information on using the software utility, refer to the user guide in
the bundled CD.
Page 5-6