Accessory - GE GLE12HSPSS Owner's Manual & Installation Instructions

Accessory

Icemaker Accessory Kit IM4D:
cost.
GEAppliances.com
visit GEAppliances.ca
pages. You will use these instead of the instructions that
come with your icemaker.
About the IM4D Icemaker
CAUTION
icemaking mechanism while the refrigerator is plugged
in. This will help protect you from possible injury.
approximately 70-100 cubes in a 24-hour period,
temperature, number of door openings and other use
conditions.
is made to the icemaker, set the power switch to OFF.
When the refrigerator has been connected to the water
supply, set the power switch to ON.
A newly-installed refrigerator may take 12 to 24 hours to
begin making ice cubes.
Preparing for Vacation
Set the icemaker power switch to OFF and shut off the
water supply to the refrigerator.
qualified servicer drain the water supply system (on
some models) to prevent serious property damage due
to flooding.
49-60769 Rev. 4
OFF
ON
Power Switch
the ejector mechanism and the heating element that
releases the cubes, located on the bottom of the
icemaker.
fills with water.
Throw away the first few batches of ice to allow the
water line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice.
cloudy, taste stale and shrink.
When you should set the icemaker power
switch to OFF
minute or two.
hours.
17