Table of Contents
Advertisement
3.3 Management Methods
The way to manage the ICS-10x:
- Web Management via a network or dial-up connection
3.3.1 Web Management
The PLANET Web-Smart Media Converter provides a built-in browser interface. You can manage the ICS-10x remotely
by having a remote host with web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
Using this management method:
The ICS-10x must have an Internet Protocol (IP) address accessible for the remote host.
3.3.2 Login the Media converter
Before you start configure the ICS-10x, please note the ICS-10x is configured through an Ethernet connection, make sure
the manager PC must be set on same the IP subnet address.
For example, the default IP address of the ICS-10x is 192.168.0.100, then the manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254 except 100), and the default subnet mask is 255.255.255.0.
1.
Use Internet Explorer 6.0 or above Web browser. Enter IP address http://192.168.0.100 (the factory-default IP
address) to access the Web interface.
2.
When the following login screen appears, please enter the default username and password (default user name and
password is "admin"). Press Login to enter the main screen of ICS-10x. The login screen in Figure 3-2 appears.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Figure 3-1 Web Management over Ethernet
-17-
User's Manual of ICS-10x
Advertisement
Table of Contents
