Navigating to a Destination
1 From the home screen, select
2 Select a category.
3 Select a destination.
4 Select Go.
The map opens and your route is marked with a magenta line.
5 Navigate using the map
page
10).
Stopping Navigation
1 From the map or compass, swipe up from the bottom of the screen.
2 Select Stop.
Acquiring Satellite Signals
Before you can use the GPS navigation features, such as recording a track, you must acquire satellite signals.
The device may need a clear view of the sky to acquire satellite signals. It may take 30 to 60 seconds to acquire
satellite signals.
1 Hold
to turn on the device.
2 Select an activity.
3 Wait until the GPS indicator bars turn green.
TIP: You can swipe up from the bottom of the screen to view the status widget.
Navigating with the Map
1 Begin navigating to a destination
2 Select Map.
A blue triangle represents your location on the map. As you travel, the blue triangle moves and leaves a track
log (trail).
3 Complete one or more actions:
• Select
, and drag the map to view different areas.
• Select
and
to zoom in and out of the map.
• Select a location on the map (represented by a pin), and select the information bar at the top of the
screen to view information about the selected location.
Navigating a Driving Route
Before you can navigate street routes, you must purchase and load City Navigator maps.
1 Select Setup > Routing.
2 Select Activity.
3 Select Automobile Driving or Motorcycle Driving.
4 Navigate to a route
(Navigating to a Destination, page
Navigating with the Compass
When navigating to a destination,
1 Begin navigating to a destination
2 Select Compass.
3 Turn until
points toward the top of the compass, and continue moving in that direction to the destination.
10
.
(Navigating with the Map, page
(Navigating to a Destination, page
points to your destination, regardless of the direction you are moving.
(Navigating to a Destination, page
10) or compass
(Navigating with the Compass,
10).
10).
10).
Navigation