Using The Product - Philips NORELCO S1030 Man

10
English
Charge indications

Using the product

1 Make sure the product is turned off.
2 Put the small plug in the shaver and
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
Battery low
When the battery is almost empty, the shaver
starts working more slowly.
Charging
When the shaver is charging, the charging light
lights up white continuously.
The charging light will remain illuminated when
the shaver is fully charged.
Note: After charging, remove the power cord
from the wall socket and pull the small plug
out of the shaver.
Always check the product and all
accessories before using. Do not use the