Using The Product - Philips NORELCO 3000 Series Manual

Using the product

2 Put the small plug in the product and
connect the power plug into any 100V to
240V AC outlet. Use only the power cord
provided.
- The display on the product will indicate the
product is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use an
attachment plug adapter of the proper
configuration for power outlet.
Note: You can also use the shaver while it is
plugged-in and charging.
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
- Use this shaver for its intended household
use as described in this manual.
- For hygienic reasons, the shaver should
only be used by one person.
- Trimming is easier when the skin and hair
are dry.
11