Adjusting The Volume; Loading Paper - Sharp MX-3050V Quick Start Manual

BEFORE USING THE MACHINE

ADJUSTING THE VOLUME

You can adjust the volume of sounds generated by the machine. Tap the [Settings] key and configure the following
settings from the [System Settings] tab.
(Administrator rights are required.)
Setting mode when an administrator is logged in (page 58)
►
Easy Easy HDD
Copy Scan File retrieve
CLOUD PORTAL Easy
Copy
Bk
C
Toner Quantity
M
Operation
Y
Guide
Setting
Image Send Settings - Common Settings - Condition
Settings - Scan Complete Sound Setting
Image Send Settings - Fax Settings - Default Settings -
Speaker Settings
Image Send Settings - Internet Fax Settings - Default
Settings - Speaker Volume Settings
Document Filing Settings - Condition Settings - Scan
Complete Sound Setting
Common Settings - Operation Settings - Condition
Settings - Key Operation Settings

LOADING PAPER

NAMES AND LOCATIONS OF TRAYS
The names of the trays are as follows.
(1)
(2)
(3)
(4)
(5)
Setting orientation of the print side
The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and
"Pre-Printed", set the paper in the reverse orientation.
Place with the print side facing the direction indicated below.
Tray
Trays 1 - 4
Bypass tray, Tray 5
16
LINE PRINTER
Job Status
Sharp OSA
12:00
Easy Easy
Scan Fax
Enlarge Settings Total Count Brightness Job Status
Display Mode Adjustment
(1) Tray 1
(2) Tray 2 (when a low stand/550 sheet paper drawer or
stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed)
(7)
(3) Tray 3 (when a stand/2x550/3x550 sheet paper drawer is installed)
(4) Tray 4 (when a stand/3x550 sheet paper drawer is installed)
(8)
(5) Tray 3 (when a stand/550&2100 sheet paper drawer is installed)
(6) Tray 4 (when a stand/550&2100 sheet paper drawer is installed)
(7) Bypass tray
(8) Tray 5 (when a large capacity tray is installed)
(6)
In normal status
Facing up
Facing down
Settings
Status
User Control
System Settings
Sitemap
Configure settings for the sound that is generated at the
completion of scanning when using the fax, scan, or other image
send function.
For fax, configure settings for the on-hook (speaker) volume, ringing
sound, line monitor, reception completed sound, sending completed
sound, and send/receive error sound.
Configure settings for sounds generated when an Internet fax is
received and when a communication error occurs.
Configure settings for the sound that is generated at the
completion of scanning when using the document filing function.
Configure settings for the sound generated when a key is tapped, and
whether a sound is generated when the key for a default setting is tapped.
With letter head or pre-printed paper set
Facing down
Facing up
LINE PRINTER
Cancel Job Status
Administrator Login
System Settings
Home Screen Copy Settings Printer
Settings Settings
Image Send Document Filing Sharp OSA
Settings Settings Settings
Common Network Security
Settings Settings Settings
Energy Save
System Control Image Quality Init. Install.
Adjustment Settings
Top of Page
Settings