Acer Veriton 3200 Service Manual page 38

Parameter
ECP DMA Channel
Floppy Disk Controller
IDE Controller
PS/2 Mouse Controller
USB Host Controller
USB Legacy Mode
Onboard Audio Chip
Game Port Address
Midi Port Address
Midi Port IRQ
31
Description
Allows you to assign a DMA channel for the
ECP parallel port function. This parameter is
configurable only if you select the Extended
Capabilities Port (ECP) as the operation
mode.
Lets you enable or disable the onboard
floppy disk controller.
Lets you enable or disable the onboard
primary, secondary or both IDE interfaces.
Lets you enable or disable the onboard PS/2
mouse controller
Lets you enable or disable the onboard USB
host controller.
Lets you activate or deactivate the USB
keyboard connected to your system. When
activated, the USB keyboard functions in a
DOS environment.
Lets you enable or disable the onboard audio
controller
Sets the I/O base address of the game port.
Sets the I/O base address of the midi port.
Sets the IRQ channel of the midi port.
Options
1 or 3
Enabled or Disabled
Both, Primary, or Disabled
Enabled or Disabled
Enabled or Disabled
Enabled or Disabled
Enabled or Disabled
201, 209, or Disabled
330, 300, or Disabled
5 or 10
Chapter 2