Acer Veriton 3200 Service Manual page 35

Device Detection Mode ............... [Auto]
Device Detection Mode ............... [Auto]
Device Type ........................ IDE CD-ROM
*Advanced PIO Mode ................... [Auto]
*DMA Transfer Mode ................... [Auto]
NOTE: The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The following table describes the parameters found in this menu.
Parameter
Device Detection Mode
Chapter 2
IDE Secondary Channel Master
Device Type........................ None
Cylinder........................... [0]
Head............................... [0]
Sector............................. [0]
Size............................... [0] M.B.
IDE Secondary Channel Slave
Description
Lets you specify the type of hard disk installed in your
system. If you want BIOS to automatically configure
Auto
your hard disk, select
disk type, you can enter the setting manually.
Setting this parameter also sets the Cylinder, Head,
Sector, and Size parameters.
. If you know your hard
Options
Auto, None, or User. The User
setting allows you to enter your
settings manually if you know
your hard disk type. The Auto
setting also sets the Cylinder,
Head, Sector, and Size
parameters.
28