Acer Veriton 3200 Service Manual page 31

Parameter
IDE Secondary Channel
Master
IDE Secondary Channel
Slave
Total Memory
1st Bank
2nd Bank
3rd Bank
Serial Port 1
Serial Port 2
Parallel Port
PS/2 Mouse
Chapter 2
Description
Specifies the current configuration of the IDE
device connected to the master port of the
secondary IDE channel.
Specifies the current configuration of the IDE
device connected to the slave port of the
secondary IDE channel.
Specifies the total amount of onboard memory.
The memory size is automatically detected by
BIOS during the POST. If you install additional
memory, the system automatically adjusts this
parameter to display the new memory size.
Indicates the type of DRAM installed in the DIMM
1 socket. The None setting indicates that there is
no DRAM installed.
Indicates the type of DRAM installed in the DIMM
2 socket. The None setting indicates that there is
no DRAM installed.
Indicates the type of DRAM installed in the DIMM
3 socket. The None setting indicates that there is
no DRAM installed.
If enabled, indicates the IRQ and I/O port Address
assigned to serial port 1.
If enabled, indicates the IRQ and I/O port Address
assigned to serial port 2.
If enabled, indicates the IRQ and I/O port Address
assigned to the parallel port.
Specifies the presence of a PS/2 mouse
Format
Drive type, capacity
Drive type, capacity
Memory size in MB
DIMM type, capacity in MB
DIMM type, capacity in MB
DIMM type, capacity in MB
I/O port address
I/O port address
I/O port address
Installed or Disabled
24