Table of Contents
Advertisement
Parameter
Event Logging
Clear All Event Logs
View Event Log
BIOS POST Event
Logging
ECC Event Logging
PCI Device Event
Logging
AC Power Lost/Recovery When this parameter is enabled, any instance of AC
Intrusion Event logging
Software NMI
39
Description
Enables or disables the event logging function of
the system
Pop-up a new diaglog box, to confirm if user wants
to clear all event logs now.
The message in the diaglog box: "Clear All
Event Logs now ?"
Press [Enter] to display detail event log message
Allow/Not allow logging or BIOS POST events
ECC(Error Correcting Code) tests the accuracy of
data as it passes in and out of memory. When this
parameter is enabled, single-bit and multi-bit
memory errors will be recorded in the event log.
PCI( Peripheral Component Interconnect) is a
32-bit bus that supports a 64-bit extension for new
processors, such as Pentium processors. It can
run at clock speeds of 33 or 66 MHz. When this
parameter is enabled, any PCI device error will be
recorded in the event log.
power lost will be monitored and logged in the event
log.
Allow logging of chassis intrusion events.
Default is "Enabled"
Do not assert NMI if disabled
Options
Enabled
Disabled
Yes
No
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Chapter 2
Advertisement
Table of Contents
