Removing The Expansion Boards - Acer Aspire X1430 Service Manual

Removing the Expansion Boards

1. Remove the power cable from the optional USB 3.0 Host Add in Card.
2. Remove the screw from the expansion board bracket opposite the PCIE1X 1 slot.
3. Gently pull up the expansion board (1), move it slightly to the left and remove (2) from the slot.
Note:Circuit boards >10 cm2 has been highlighted with the yellow rectangle as above image
shows. Please detach the Circuit boards and follow local regulations for disposal.
Aspire AX1430 Service Guide 31