Table of Contents
Advertisement
3. Reattach the hard disk drive bay to the disk drive metal frame.
Figure 4-11 Attaching a Hard Disk Drive to the Bracket
4. Replace the metal frame to its original position in the system and reassemble
the system.
4.5
Installing and Removing Expansion
Boards
4.5.1
Installing a PCI Card
To install a PCI card:
1. Turn off and unplug the system.
2. Locate the riser card.
3. Locate an empty PCI slot on the slot board.
4. Remove the bracket on the housing opposite to the empty PCI slot.
5. Insert a PCI card into the slot. Make sure that the card is properly seated.
Chapter 4 - Installing Optional Components 4-11
Advertisement
Table of Contents
