Machine Disassembly and Replacement
This chapter will guide you how to disassemble and reassemble Aspire T320.
To highlight the point of this chapter is based on AcerPower F1 to edit, because the disassembly procedures
are similar.
To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge.
Wire cutter.
Phillips screwdriver (may require different size).
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatches when putting back the components.
Chapter 3
Chapter 3
43