Change History - Konftel 800 Installation & Administration

INTRODUCTION

CHANGE HISTORY

Issue Date
Release June 2021
1.0.5
Summary of changes
• Updated Icons
button.
history
• Updated Logging in to the web interface of Konftel
800 on page 26 with the information about lockout
after incorrect login attempts.
• Updated Phone settings description
with the default phone name and FIPS mode
settings.
• Updated Network settings description
with the information about IP address in the 802.1x
slider section.
• Updated SIP settings description
the information about allow via header rewrite, use
of static source ports, and USB only user mode.
• Updated Standard encryption algorithms
77 with the information about FIPS mode.
• Updated Legacy encryption mode
the information about firmware upgrade.
• Added new section
• Added new section
85.
• Updated Expansion of the phone coverage
92 with the information about disabling the unused
daisy chain ports during active calls.
• Updated Bluetooth® connection
the information about USB only user mode.
• Added new section
downgrade using a USB mass storage device
page 106.
• Updated Configuration file structure
with new parameters.
• Added new section
request forgery
• Added Appendix A
list of encryption methods enabled and disabled in
Legacy encryption mode.
7
on page 14 with the
FIPS mode on page 83.
USB only user mode
on page 99 with
Firmware upgrade and
Protection against cross-site
on page 144.
with the information about the
Clear call
on page 30
on page 43
on page 64 with
on page
on page 81 with
on page
on page
on
on page 109
Table continued...