Setting Up The Charger - BT BT3550 User Manual

BT3550 multiple pack owners only
Location
You need to place your BT3550 charger close enough to a mains
power socket so that the cable will reach.

Setting up the charger

1. Plug the power adaptor cable (item code 083050) into the
mains wall socket and switch the power on.
2. Remove the protective film from the handset screen and
activate the batteries by pulling the plastic tab away from the
back of the handset.
3. Place the handset on the charger and charge for at least
24 hours.
Your BT3550 multiple pack is now ready for use.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Mains power cable
8