Pre-Installation; Hardware Contents, Product Specifications; Tools Required - HAMPTON BAY 80397 Use And Care Manual

Pre-Installation

Hardware Contents
Bolt
Connection Plate Touch-up Pen
Part Description
AA Bolt 1/4 in. x 1-1/4 in.
BB Washer 1/4 in. x 3/4 in.
CC Wood Dowel
DD Shelf Pin
EE Screw
FF Knob (with bolt, not to scale)
GG Connection Plate (pre-attached)
ZZ Touch-up Pen
NOTE:
Hardware shown to actual size.
Product Specifications
Voltage
Amps (with heater)
Amps (without heater)
Watts (with heater)
Watts (without heater)

Tools Required

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any
part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
NOTE:
Tools not shown at actual size.
Washer Wood Dowel
120 V, 60 Hz
11.7 Amps
< 0.1 Amps
1400 Watts
< 10 Watts
Shelf Pin Screw
5
Please contact 1-877-527-0313 for further assistance.
Knob
Quantity
30
30
34
8
43
2
6
1
HAMPTONBAY.COM