Table of Contents
Advertisement
Menu Option
Presentation Timer
Pattern
Blank Timer
Message
Splash Screen
Description
Presentation timer can indicate the presentation time on the
screen to help you achieve better time management when
giving presentations.
Timer Period
Sets the time period. If the timer is already on, the timer will
restart whenever the Timer Period is reset.
Timer Display
Allows you to decide if you want the timer to show up on the
screen for one of the following time periods:
ͫ Always: Displays the timer on screen throughout the
presentation time.
ͫ 1 min/2 min/3 min: Displays the timer on screen in the
last 1/2/3 minute(s).
ͫ Never: Hides the timer throughout the presentation time.
Timer Position
Sets the timer position.
Timer Counting Direction
Sets your desired counting direction between:
ͫ Count Down: Decreases from the preset time to 0.
ͫ Count Up: Increases from 0 to the preset time.
Sound Reminder
Allows you to decide if you want to activate a sound reminder.
Once enabled, a double beep sound will be heard at the last 30
seconds of counting down/up, and a triple beep sound will be
produced when the timer is up.
Start Counting/Off
Select Start Counting to activate the timer. Select Off to cancel
it.
Helps adjust the image size and focus, and checks for distortion
in the projected image.
Allows the projector to return the image automatically after a
period of time when there is no action taken on the blank
screen. To display the blank screen, press Blank on the projector
or remote control.
NOTE:
Do not block the projection lens as this could cause the
blocking object to become heated and deformed or even
cause a fire.
Sets reminder messages, i.e. "Blank" message, On or Off.
Selects which logo screen will appear during projector start-up.
51
Advertisement
Table of Contents
