Main - Acer TravelMate 7530 Service Manual

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Information
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
SATA Mode:
F1 Help
ESC Exit
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time Sets the system time. The hours are displayed with 24-hour
format.
System Date Sets the system date.
System Memory This field reports the memory size of the system. Memory size
is fixed to 3071 MB.
Extended This field reports the Extended Memory size.
Memory Memory size is fixed to 4094 MB.
Video Memory Shows the video memory size. VGA Memory size=32 MB
Quiet Boot Displays the logo screen while booting.
Network Boot Enables, disables the system boot from LAN (remote server).
F12 Boot Menu Enables, disables Boot Menu during POST.
D2D Recovery Enables, disables D2D Recovery function. The function allows
the user to create a hidden partition on hard disc drive to store
operation system and restore the system to factory defaults.
SATA Mode Control the mode in which the SATA controller should operate.
Chapter 2
PhoenixBIOS Setup Utility
Main Advanced Security
[13:04:04]
[05/15/2008]
634 KB
1790 MB
[256 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[ACHI Mode]
↑↓
Select Item
←→
Select Menu
Boot Power
F5/F6 Change Values
Enter Select Sub-Menu
Description
Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
F10 Save and Exit
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/
YYYY
(month/day/year)
N/A
N/A
N/A
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Disabled or
Enabled
Option: Enabled or
Disabled
Option: AHCI Mode
or IDE Mode
29